| Model |
SF-60-5 |
SF-60-12 |
SF-60-15 |
SF-60-24 |
| Specification |
| DC output voltage |
5V |
12V |
15V |
24V |
| Output voltage error（Note：2） |
±2% |
±1% |
±1% |
±1% |
| Rated output current |
12A |
5A |
4A |
2.5A |
| Output current rage |
0-12A |
0-5A |
0-4A |
0-2.5A |
| Wave and noise(Note ：3） |
120mVp-p |
120mVp-p |
150mVp-p |
150mVp-p |
| Inlet stability(Note ：4） |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Load stablity (Note ：5） |
±1% |
±0.5% |
±0.5% |
±0.5% |
| DC output power |
60W |
60W |
60W |
40W |
| Efficiency |
72% |
76% |
77% |
79% |
| Adjustable range for DC voltage |
+10,-5% |
+10% |
+10% |
+10% |
| AC input voltage range |
85-264VAC
47-63Hz；120-370VDC |
| Input current |
2A/115V 60A/230V |
| AC INnrush current |
Cold-start current 30A/115V
60A/230V |
| Leakage current |
<3.5mA/240VAC |
| Overload proctection |
105%~150% Tpye:pulsing hiccp
shutdown Reset:auto recovery |
| Over-voltage protection |
115%~135% |
| High-temperature protection |
………… |
| Temperature coefficient |
±0.03%/℃(0~50%) |
| Setup rise hold up time |
800ms,50ms,10ms/115V
300ms,50ms,80ms/230VAC |
| Vibration |
10-500HZ,2G 10min,/1cycle，Period
for 60min，Each axes |
| Withstand voltage |
Input and output
internal：1.5KVAC,Input and enclosure：1.5KVAC,Output and
enclosure：0.5KVAC |
| Isolation resistance |
Input and output internal:Input
and enclosure,Output and enclosure：500VDC/100MΩ |
| Working temperature and humidity |
-10℃~+60℃（Refer to output
derating curve），20%~90%RH |
| Store temperature and humidity |
-20℃~+85℃,10%~95%RH |
| Overall dimension |
159×97×38mm |
| Weight |
0.55Kgs |
| Safety standards |
UL1012 TUV
EN6050(IEC,UL1950)Approved |
| EMC standards |
CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification |
Note：
1.The testing condition for the
paramenter above is :230VAC input,rated load,25℃70%
RH.Humidity.
2.Error.include the setting error,line
stability and load stability.(Note:5).
3.Wave test:adopting
"A12"double wire for 20MHz,and 0.1UF&47UF capacitor
short-circuit for interrupting.
4.Inlet voltage stability
test:when is over load,the lowest voltage of inlet is up to
the highest voltage.
5.Load stability test:the load is from
0% to 100%.
6.C2、3、6 must be knocked down. |
(T)(Q)-50(70).gif)
