| |
|
Current Page>> Product\Switch Power Supply |
|
 Switch Power Supply
 Three groups output-60
|
 |
|
Low price and high reliability
105℃
output capacitor
AC input power suitable for the world
Hight efficiency and low operation temperature
Soft-start current can reduce the AC input impact
effecticly
With Short-circuit and owwerload protection
Compact size,light weight
100% full-load burning test
Installed with EMI filter,minimum wave |
|
Model
Specification |
T-60A |
T-60B |
T-60C |
CH1 |
CH2 |
CH3 |
CH1 |
CH2 |
CH3 |
CH1 |
CH2 |
CH3 |
| DC output voltage |
5V |
12V |
-5V |
5V |
12V |
-12V |
5V |
15V |
-15V |
| Output voltage error（Note：2） |
±2% |
±6% |
±6% |
±2% |
±6% |
±6% |
±2% |
±6% |
±6% |
| Rated output current |
5A |
2.5A |
0.5A |
5A |
2.5A |
0.5A |
5A |
2.5A |
0.5A |
| Output current rage |
0.5-7A |
0.2-3.5A |
0-0.1A |
0.5-7A |
0.2-3.5A |
0-0.1A |
0.5-7A |
0.2-3.5A |
0-0.1A |
| Wave and noise(Note ：3） |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
| Inlet stability(Note ：4） |
±0.5% |
±1% |
±0.5% |
±0.5% |
±1% |
±0.5% |
±0.5% |
±1% |
±0.5% |
| Load stablity (Note ：5） |
±1% |
±4% |
±1% |
±1% |
±4% |
±1% |
±1% |
±4% |
±1% |
| DC output power |
57.5W |
61W |
62.5W |
| Efficiency |
72% |
72% |
72% |
| Adjustable range for DC voltage |
CH1;+10,-5% |
CH1:+10,-5% |
CH1:+10,-5% |
| AC input voltage range |
85-132VAC/170-264VACSelected by
switch47-63Hz；120-370VDC |
| Input current |
2A/115V 1A/230A |
| AC INnrush current |
Cold-start current 30A/115V 60A/230V |
| Leakage current |
<1mA/240VAC |
| Overload proctection |
105%-150%Type:Foldback:current limiting reset:auto
recovery |
| Over-voltage protection |
CH1:5.75-6.75V |
| High-temperature protection |
………… |
| Temperature coefficient |
±0.03%/℃（0-50℃）ON+5V |
| Setup rise hold up time |
800ms,50ms,10ms/115VAC 300ms.50ms,80ms/230VAC |
| Vibration |
10-500Hz,2G 10min,/1cycle，Period for60min，Each axes |
| Withstand voltage |
Input and output internal：1.5KVAC,Input and
enclosure：1.5KVAC,Output and enclosure：0.5KVAC |
| Isolation resistance |
Input and output internal:Input and enclosure,Output
and enclosure：500VDC/100MΩ |
| Working temperature and humidity |
-10℃~+60℃（Refer to output derating curve），20%~90%RH |
| Store temperature and humidity |
-20℃~+85℃。10%~95%RH |
| Overall dimension |
159×97×38mm |
| Weight |
0.56Kgs |
| Safety standards |
UL 1012 TUV EN60950(IEC950,UL1950) |
| EMC standards |
CISPR22(EN55022),class B,IEC801-2,-3,-4,IEC555-2
Verification |
Note：
1.The testing condition for the paramenter
above is :230VAC input,rated load,25℃70% RH.Humidity.
2.Error.include the setting error,line stability and load
stability.(Note:5).
3.Wave test:adopting "A12"double wire for
20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.
4.Inlet voltage stability test:when is over load,the lowest
voltage of inlet is up to the highest voltage.
5.Load stability
test:the load is from 0% to 100%.
6.Total output canbe maximum
Current,total load can not exceed the maximum output
power.
7.C23must be knocked down. |
|
|
|
 |
|
|
