| |
|
Current Page>> Product\Switch Power Supply |
|
 Switch Power Supply
 Single output-SP-500
|
 |
|
Low price and high reliability
105℃
output capacitor
AC input power suitable for the world
Height efficiency and low operation temperature
Soft-start current can reduce the AC input impact
effectively
With Short-circuit and overload protection
Compact size,light weight
100% full-load burning test
Installed with EMI filter,minimum wave |
|
Model
Specification |
SP-500-12 |
SP-500-13.5 |
SP-500-15 |
SP-500-24 |
SP-500-27 |
SP-500-48 |
| DC Voltage |
12V |
13.5V |
15V |
24V |
27V |
48V |
| Voltage Tolerance |
±2% |
±2% |
±1% |
±1% |
±1% |
±1% |
| Rated Current |
40A |
36A |
32A |
20A |
18A |
10A |
| Current Range |
0-40A |
0-36A |
0-32A |
0-20A |
0-18A |
0-10A |
| Ripple&Noise(Max.) |
240mVp-p |
240mVp-p |
240mVp-p |
240mVp-p |
200mVp-p |
300mVp-p |
| Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Load Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Rated Power |
480W |
486W |
480W |
480W |
486W |
480W |
| Efficiency |
84% |
84% |
83% |
85.5% |
86.5% |
87% |
| Voltage Adjust Range |
10-13.2V |
12-15V |
13.5-18V |
20-26.4V |
24-30V |
41-56V |
| Voltage Range |
88～264VAC
47-63Hz;124～370VDC |
| AC Current |
7A/115V
3.5A/230V |
| Inrush Current(Max.) |
18A/115V
36A/230V |
| Leakage Current |
<3.5mA/240VAC |
| Overload Protection |
105-135% TYPE：Current
limitation auto recovery |
| Over-voltage
Protection |
13.8-16.2V |
15.5-18.2V |
18-21V |
27.6-32.4V |
31-36.5V |
57.6-67.2V |
| Over-temperature
Protection |
≥55℃FAN ON ≤45℃FAN
OFF ≥70℃ OUTPUT CUTOUT |
| Temp. Coefficient |
±0.03%/℃(0～50℃) |
| Setup.Rise,Hold Time |
1.5s,50ms,20ms |
| Vibration |
10～500Hz,2G
10min,/11cycle,60min,each axes |
| Withstand Voltage |
I/P-O/P:3KVACI/P-FG:1.5KVACI/P-FG:0.5KVAC |
| Isolated Resistor |
I/P-O/P,I/P-FG,I/P-FG:500VDC/100MΩ |
| Working Temp .Humidity |
-10℃～+50℃,20%～90RH |
| Storage Temp .Humidity |
-20℃～+85℃,10%～95%RH |
| Dimension |
185×120×93mm |
| Weight |
1.8kg |
| Safety Standards |
UL1950 |
| EMC |
CISPR22(EN
55022),IEC1000-4,2,3,4,5,6,8,11 IEC1000-3-2 |
Note：
1.All parameters NOT specially mentioned are measured at 230VAC input ,rated load and 25 of ambient temperature.
2.Tolerance:includes set up tolerance,line regulation and load regulation
3.Ripple&noise are measured at 20MHZ of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.
4.Line regulation:min&max voltage of the rated load.
5.Load regulation:load from 0 to 100% |
|
|
|
 |
|
|
