 |
|
Low price and high reliability
105℃
output capacitor
AC input power suitable for the
world
Hight efficiency and low operation
temperature
Soft-start current can reduce the AC input
impact effecticly
With Short-circuit and owwerload
protection
Compact size,light weight
100% full-load
burning test
Installed with EMI filter,minimum
wave |
|
| |
Model |
| Specification |
SF-10-5 |
SF-10-12 |
SF-10-24 |
| DC output voltage |
5V |
12V |
24V |
| Output voltage error（Note：2） |
±2% |
±1% |
±1% |
| Rated output current |
2A |
0.8A |
0.42A |
| Output current rage |
0-2A |
0-1.1A |
0-0.42A |
| Wave and noise(Note ：3） |
50mVp-p |
12mVp-p |
240mVp-p |
| Inlet stability(Note ：4） |
±0.5% |
±0.5% |
±0.5% |
| Load stablity (Note ：5） |
±1% |
±0.5% |
±0.5% |
| DC output power |
10W |
9.6W |
10.8W |
| Efficiency |
72% |
74% |
78% |
| Adjustable range for DC voltage |
+10,-5% |
+10% |
+10% |
| AC input voltage range |
85--264VAC,47-63Hz；120-370VDC |
| Input current |
0.3A/115V 0.15A/230A |
| AC INnrush current |
Cold-start current15A/115V 30A/230V |
| Leakage current |
<0.5mA/240VAC |
| Overload proctection |
105%-150%Type:Foldback:current limiting reset:auto
recovery |
| Over-voltage protection |
115%135% |
| High-temperature protection |
………… |
| Temperature coefficient |
±0.02%/℃（0-50℃） |
| Setup rise hold up time |
200ms,500ms,20ms |
| Vibration |
10-500HZ,2G 10min,/1cycle，Period for60min，Each axes |
| Withstand voltage |
Input and output internal：1.5KVAC,Input and
enclosure：1.5KVAC,Output and enclosure：0.5KVAC |
| Isolation resistance |
Input and output internal:Input and enclosure,Output
and enclosure：500VDC/100MΩ |
| Working temperature and humidity |
-10℃~+60℃（Refer to output derating
curve），20%~90%RH |
| Store temperature and humidity |
-20℃~+85℃。10%~95%RH |
| Overall dimension |
74×68×27mm |
| Weight |
0.14Kgs |
| Safety standards |
Meet UL 1012 requirement(Not apply for the mark) |
| EMC standards |
Meet FCC part15J Conduction classB |
Note：
1.The testing condition for the paramenter
above is :230VAC input,rated load,25℃70%
RH.Humidity.
2.Error.include the setting error,line stability and
load stability.(Note:5).
3.Wave test:adopting "A12"double wire
for 20MHz,and 0.1UF&47UF capacitor short-circuit for
interrupting.
4.Inlet voltage stability test:when is over
load,the lowest voltage of inlet is up to the highest
voltage.
5.Load stability test:the load is from 0% to 100%. |
